Maintain Your Level Washing Machine with These Tips

Even though you prevent the loud distress alarm, the banging and shaking noises from an unstable washing machine can still be worrisome. Moreover, it can result in extra wear and tear that’ll just lead to a costly repair over time. Luckily, this is a simple issue to resolve. Below are 6 steps that can help you keep up your level washing machine

Assess the level 

Prior to doing anything to re-leveling your washing machine, you need to determine what the underlying issue is. You can test it using a carpenter’s bubble level. It should be placed on each side of the machine and then front to back. Observe where you can see the bubble. When a bubble isn’t centered, it would be best to continue doing the following steps. 

Inspect the back legs 

Usually, the washing machines’ back legs are self-leveling. As soon as the machine levels side to side, ask for assistance for tilting the machine headfirst so that you can resolve the back legs. Raise the washing machine off the floor by 3-4 inches and then put it down to adjust the back legs. When your washer doesn’t have self-adjusting back legs, you’ll have to adjust them manually similar to the manner you did the front legs of the washer.  

Inspect the front legs 

Regardless of the model, make, or the year, all washing machines are comprised with adjustable legs. Begin with the most accessible legs, which is located in the front and this can possibly do the job. Undo the lock nut on the legs and then modify the machine so that it’ll br placed low on the ground. Then, you have to fully screw in one leg and adjust the other legs if required to let the bubble move to the center. 

Tighten the lock nuts 

Once you neglect this step, your washing machine will become imbalanced again sooner or later, needing you to do all of these steps over and over. You can utilize the leveler to reassess the machine level side to side and front to back. When you think that you’re already done adjusting the legs, try to make sure that you have tightened the lock nuts well by rechecking each leg. To determine whether it shakes back and forth, try leaning up against the washing machine. If it doesn’t rock, your repair is already done. Otherwise, you still have to recheck the level and keep in repeating such steps until your machine is already balanced.  

Keep on checking it after every few months 

Inspect how often this happens, particularly when you observe too much noise. Also, you have to make sure that the level in a top loader is maintained. You can do this by evenly loading the clothes and not causing too much stress on the belts.  

Examine the washer 

Start your washer using a spin cycle and observe whether there’s any banging, vibrating, or rocking motion that occurs. Once it shakes while it’s running, you need to recheck the legs. The floor of your laundry room may have sinking areas that must be repaired.  

Have it checked by the experts 

If the problem happens all the time, it would be best to avail of the appliance repair Columbia services today. 

Tips to Prolong the Life of Your Washing Machine

Almost all property owners depend on their washing machines to keep their clothes smelling great and looking clean and fresh. However, there will come a time when the clothes will smell dirty as soon as they come out of the washer as if they’d been sitting too long. Sadly, this occurs if people fail to realize that their washing machine requires to be maintained and kept clean to make sure that their clothing will be cleaned properly. But, if your machine already experiences unexpected breakdowns and leaking, this only leaves you with no other option but to contact a certified technician when it comes to washing machine repair immediately. Here are some tips on how you can maintain your washing machine and deep-clean to guarantee that it works for several years to come: 

Inspect the detergent drawer 

You can begin searching for the sour smell by inspecting the detergent drawer. Too much detergent can buildup in the drawer eventually, making it challenging for the clothes to be cleaned properly. Moreover, this can block up the drains. To prevent this from happening, all you need is to take out its detergent drawer and soak it in warm water. After that, use a toothbrush to scrub away any residue.   

Clean the seal 

Take out the seal so that you can eliminate any gunk that’s been stuck in the seal. The seal can catch wet tissues, lint, and anything else that we usually forget to pull out of our pockets. Once those junks accumulate, they can start to smell and cause mold. So, before you wipe it down with a damp cloth, make sure to run around your hand all over the seal to eliminate anything trapped on it.  

Empty the trap 

Everything that does not get caught by your machine’s seal transfers into the trap. Things can be stuck in the trap for several months as it collects mildew until the washer won’t be able to drain water. If you want to clean it, use a flathead screwdriver to pry open the door. Then, pull at the black tube and drain your hose into a bowl. Twist the trap cap and get rid of all the stuff that is blocked from inside the space before you replace everything.  

Run the cycle of “self-clean” 

Doing this goes a long way for your washing machine. A lot of technicians suggest running the cycle once every a couple of months, or as early as you observe a foul smell. You just need to put 1 cup of bleach to the detergent cup before you start the cycle. This is an additional technique you can do to fight off a specifically strong smell.  

Keep the clean going 

Adhering to the same steps after every washing session will make your washer last for a longer time. If ever you can see any damage on your washing machine or any of your appliances, visit our website or click on appliancerepairtallahassee.net immediately to have them checked by our appliance experts.